PREPARING FINGERNAILS
1. Prepare natural fingernails (push back cuticles from the nail helf-moon, clean fingernail, etc.)
2. Use a white buffer to make natural nails opaque
3. Brush off carefully and use a nail cleaner to clean the nail if necessary
APPLYING COLOR
1. Apply a light layer of non-acid primer over all of your nails, then let air dry for 60’’
2. Apply a light layer of base/finish over all of your nails, then dry under a uv lamp for 120”* or under a led lamp for approximately 30’’
3. Apply a first layer of color MOOD to your nails sealing the tips carefully. Then dry under a UV lamp for 120”* or under a led lamp for approximately 30’’ (do not cleanse).
4. Apply a second layer of color MOOD to your nails sealing the tips carefully, then dry under a UV lamp for 120’’* or under a led lamp for approximately 30”. (do not cleanse)
5. Apply a light layer of base/finish to seal your nails, then dry under a UV lamp for 120’’* or under a led lamp for approximately 30”.
6. Clean fingernails with a nail cleaner to make them glossy and bright, moistening a cotton pad slightly and polishing finished nails with it.
VIDEO GUIDE
Now that you know how to apply it, discover all the semipermanent available on our web-site!
HOW TO REMOVE
1.
Use a file grit 180 or block 4 face MI-NY step 2 to abrade the layer of semi-permanent polish lightly.
2.
If necessary, use a sufficient quantity of nourishing conditioner for nails close to the cuticles to protect them
3.
Fill the 5 slots in the special tray with remover semi permanent UV lacquer MI-NY, inserting your fingers for approximately 12 minutes. Let them soak continuosly.
4.
Lift your fingers (you will see cracks on the surface of the colour which indicate that the removal process is under way).
5.
Remove delicately with a cuticle pusher or an orange stick.
6.
If there is any color residue, use a file grit 180 or even better 4 way buffer MI-NY step 2 and follow steps 3-4 for perfectly natural nails.
